Contacts
× Close
ADD TO WISH LIST

1” F. programmable solenoid valve

code 90826

A practical, reliable solution to program underground irrigation systems, controlling one solenoid valves if there is no electricity.

  • wide, legible display
  • independent from electricity network
  • iP68 protection: the maximum against water, moisture and dust
GO TO SPECIFICATIONS
COMPARE

DESCRIPTION

Can be installed directly on the tap or water well outlet. Protected by 100% sealed cover operates also in total submersion. Easy to program with three keys only. Irrigation time from 1 min to 23 h. 59 min. With option of up to 6 irrigation cycles per day. Manual and weekly programming with exclusion of specific weekdays as required. Bistable 9 V solenoid with low power consumption. Operates with a 9 V battery, sufficient for an entire season. Electronic section separable from hydraulic section for easy programming or storage during winter. Operating pressure from 0,5 to 12 bar. 1” (26-34 mm) female inlet and outlet thread. Flow rate from 4,6 to 96 l/min. Operating temperature range +5° to +70°.

WATCH THE VIDEO

TECHNICAL SPECIFICATIONS

  • Width: 131 mm
  • Height: 150 mm
  • Depth: 103 mm
  • Weight: 705 g
  • body: PA6
  • cover lid: PC, rubber
  • Inlet thread: 1"
  • Outlet thread: 1"
  • Working pressure: 0,5 - 12 bar
  • Voltage: 9V
  • Outlets: 1
  • Programmes: 6
  • Type of programmes: customizable
  • Frequency of watering cycles: 6 per day, 1 per week, with the exclusion of single days
  • Min. watering duration: 00:01′
  • Max. watering duration: 23:59′
  • Rain sensor: no
  • Powered by: 1x9V
  • Valves voltage: 9V Latching
  • Warranty: 2
Code PackagingQuantityWidthHeightDepthVolumeWeightPcs per pallet
90826 Box 1pc 19cm 19,5cm 11cm 0,004m³ 0,85 120pc
MANUALS AND DOWNLOADS
SUPPORT AND HELP CENTRES